How To Use Soap With Electric Pressure Washer

How to use your soap injector on your electric pressure washer. One of the first things you need to do. Anytime you’re going to use your pressure washer is to make sure that do a pre-use fluid inspection. I’m gonna link some information on how to do that and the full startup procedures on Electric pressure washer. One of the things you’re going to notice is your soap injector with an electric pressure washer is either going to be a built-in or an external one. This particular soap injector I am going to explain is external.

Things to be considered

The first thing you want to make sure that your screen is clean at the end of your line. Once you’ve done and ready to place the hose in a bucket or container of solution. You have to take two parts of water and one part of the soap solution. This is more than adequate for any application needed. Once you have the hose place in the solution. Take a look at the soap nozzle that you need for the job.

use soap with electric pressure washer

Every electric power washer comes with a black soap ER tip. Make sure that you put it into the end of your wand. This is the particular tip that you need to use, or your soap injector will not work.

Ready for The Task

We’re ready to start the unit. Once you’ve started the unit you’ve got your blog tip at the end of the Wand. And ready to spray the surface that you want to clean. Obviously, you want to start from the top down. Now get ready to rinse the vehicle. What you’ll notice is that there’s going to be a little bit of soap to come out, that’s the soap that remains in the wand. So if you’re short while though you will have just water that comes out of this one and that will be more than something. 

Final Step

Now that you’re done with your cleaning project the next step is very important. Make sure that you clean out your soap injector line and your external soap injector. The reason for this is because there is a little spring in a little ball and if soap sits and gums up on that it could affect future use.

So what you have to do is to place the line in a clean bucket of water and turn the unit on. Once units on you wanna spray water out the gun that should take care of that I hope you liked the article if you found the article helpful please leave a comment.

Leave a Comment